Web Analytics

OGA Malaysia 2019 Review

Posted by AMI Admin. Categories: Exhibitions.

Another successful week in Malaysia at the South East Asia region’s most popular oil and gas industry event. Springtech personnel had the opportunity to meet with customers old and new and showcase our expanding range of springs including our newest investment in taking our wire diameter coiling capabilities up to 25.4mm (1″).

Springtech’s Commercial Manager, Chris Eaton, was interviewed during the show discussing the added-value of participating under the umbrella of the UK Pavilion managed by the Energy Industries Council (EIC)



DSEI London 2019

Posted by AMI Admin. Categories: Exhibitions.

Springtech will be exhibiting at the DSEI show, the world’s leading defence and security event, at the Excel Centre, London in September.

A selection of our bespoke springs will be available to view, designed for a range of high-performance applications across:

Land platforms


Air platforms


Naval & Marine platforms


We can offer spring designs utilising a variety of materials including high carbon steels (music wire), high/low temperature and corrosion resistant alloys. To compliment material selection we can advise on a range of product finishes including defence and aerospace approved heat treatments, platings and coatings.

Our Technical and Commercial teams will be available on stand during the show to advise on the optimum solution for your spring application requirements.

Visit us in South Hall, Stand S10-101

DSEI 2019

10th – 13th September

Excel, London



OGA Malaysia 2019

Posted by AMI Admin. Categories: Exhibitions.

Springtech will be exhibiting again at the OGA Show Kuala Lumpur, Malaysia. A wide range of our custom-made springs will be available to view on stand, including compression, extension and torsion springs for NACE compliant and high temperature applications. Our Technical and Commercial teams will be available on stand to discuss customers’ spring requirements and give specialist advice on subsea, onshore and offshore application issues.

Visit us in Hall 5, UK National Pavilion

OGA 2019

18th– 20th June 2019

Kuala Lumpur Convention Centre



Valve World Expo 2018

Posted by AMI Admin. Categories: Exhibitions.

Springtech will be exhibiting again at the Valve World show in Dusseldorf.

Our Technical and Commercial teams will be available on stand to discuss customers’ spring requirements and application issues. Due to a recent major capital investment we have expanded our wire coiling diameter capabilities up to 25mm for compression, torsion and extension springs!

Visit us in Hall 4, Stand A12

Valve World Expo 2018

27th– 29th November

Messe Dusseldorf


ADIPEC Abu Dhabi 2018

Posted by AMI Admin. Categories: Exhibitions.

Springtech is excited to be exhibiting at the Adipec Abu Dhabi Show for the first time in November. As a member of the Energy Industry Council (EIC) our exhibition stand will be located within the UK Pavilion in Hall 8.

There will be examples of bespoke compression, extension, torsion, garter and wave springs on display covering applications ranging from valves, pumps, sealing systems, ROV and marine equipment.

Springtech technical staff will be on-hand to offer expert advice on spring design and material selection including NACE compliant applications.

Visit us in Hall 8, Stand 8635

Adipec 2018
12th – 15th November 2018

Abu Dhabi National Exhibition Centre (ADNEC)


Compression (valve) springs for Nuclear industry

Posted by AMI Admin. Categories: Springs.

A perfect example of what we offer as a full-service spring design validation and manufacturer.

We were contacted by a major nuclear generation facility carrying out service work during a routine maintenance shutdown. The customer had a requirement for some replacement springs which had failed in a critical valve system (no longer supported by the OEM). Turnaround times were very tight as the customer had only one week to get the valve back on-line.

The customer sent us a sample of one of the collapsed springs (no drawing was available) and our Engineers immediately diagnosed the failure as an issue with the original specification of material for the working environment – chemical contact exposure.

Using our spring design validation software our Engineers upgraded the material specification to Phynox which would deliver enhanced reliability and longevity in this working environment but still met the dimensional and spring rate specifications. The customer signed-off on the new spring and our manufacturing team got to work on coiling, heat treating and grinding the springs.

From the initial customer contact through manufacturing, inspection and shipment took just four days!

Agricultural Harrow Torsion Springs

Posted by AMI Admin. Categories: Springs.

At Springtech our engineering team are specialists in bespoke springs for a wide variety of applications. We have extensive experience of developing springs and wireforms for manufacturers and farmers in the agricultural vehicle and equipment sector.

One of our fastest moving products is the Springtech Harrow Torsion Spring (originally developed as a service component for Gray’s Harrows). Made from 35 coils of 9.4mm carbon steel wire the legs have been designed to allow the farmer to easily fit the spring to a range of harrowing equipment.

As harrowing season is so weather dependent, we hold stock of the Harrow Spring to ensure that agricultural equipment dealers, service workshops and farmers can order our springs on a quick turnaround and take full advantage of a break in the weather!

SPE Offshore 2017

Posted by AMI Admin. Categories: Exhibitions.

Springtech to exhibit again at Europe’s leading E&P show

Springtech will be in Aberdeen again in September to reinforce their ongoing commitment to the offshore Oil & Gas sector.

The SPE Offshore organisers are forecasting 50,000 visitors from 100 countries who will have the opportunity to connect with over 1000 exhibitors during the four day event in the first week of September. The conference sessions include keynote addresses from the CEO’s of Shell and BP.

Springtech will be showcasing their engineering and manufacturing capabilities across the spring, wireform and presswork product group technologies. Staff from the Engineering and Commercial teams will be on hand to welcome customers old and new!

Visit us in Hall 2, stand A36
SPE Offshore Europe 2017
5th – 8th September 2017
Aberdeen Exhibition & Conference Centre (AECC)

OTD Stavanger 2017

Posted by AMI Admin. Categories: Exhibitions.

Springtech renews its relationship with the Norwegian continental shelf !

Springtech is justifiably proud of building long term supply partnerships with the key exploration, production and engineering companies operating across the Norwegian Continental Shelf.

Having exhibited at shows in Stavanger and Bergen in previous years Springtech are delighted to announce they will be attending the OTD Offshore Technology show again in October.

Springtech staff will be available to discuss your new spring design projects and offer expert advice on the optimum material selection for springs and wireforms operating in some of the toughest working conditions in the world.

Visit us in Hall E, stand 4528
OTD Offshore Technology Days 2017
18th – 19th October 2017
Stavanger Forum www.offshoredays.com